QSSU-SINOPEC-CPI-Coating and Painting Inspector
2026-05-22T09:35:55+00:00
Q-Sourcing
https://cdn.greatugandajobs.com/jsjobsdata/data/employer/comp_7433/logo/Q-Sourcing.png
https://www.qsourcing.com/
FULL_TIME
Kampala
Kampala
00256
Uganda
Consulting
Science & Engineering, Construction, Energy & Mining
2026-07-25T17:00:00+00:00
8
About This Job:
Q-Sourcing Limited trading as Q-Sourcing Servtec is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda, and South Sudan.
On behalf of our client SINOPEC, we are looking for a competent, skilled, and experienced Coating and painting Inspector to work at Site in Uganda
Key Responsibilities
The primary responsibilities of this position include:
- Assist in compiling of company Quality Plan, Inspection, and test Plan (ITP), and Quality Procedures and all pertained QA/QC documentation before commencement of any fabrication/construction work.
- Witness and monitor site coating activities, inspection, and testing following the approved Quality Plan, ITP, Quality Procedures, etc.
- Review the approved procedure.
- Record & and report all inspection requirements as per ITP.
- Responsible for yard and field ongoing activities for coating inspection.
- Ensuring the correct and valid calibration status of the inspection equipment.
- Raise RFI’s to client inspection department through project management.
- Witness & Inspection for Field Joint Coating.
- Physical examination of the surface to be insulated is clean, dry, and free from other foreign matters.
- Verify that no welding is to be carried out all welding work required has been finished already.
- Verify no further painting touch up is required.
- Physical examination for that material applied is the same as per the specification.
- Check for uniformity of insulation surface, no gaps or voids, and check for thickness.
- Verify the distance between the bands & and check moisture protection at the location where moisture could enter the insulation.
- Check the joints of insulation segments are properly staggered and tight.
- Verify that the insulation is dry and ready for weatherproofing.
- Witness & and inspect all Blasting, Painting, and insulation activities for the Structures, Equipment, Piping, and tanks.
- Inspect with a third party and vendor inspection for onward submission to the client.
- Preparation of project documentation, Co-ordination for internal auditing
Required Qualifications & Experience
Academic Qualifications
- Bachelor’s degrees in electrical/Instrument/Telecoms engineering or Trained qualifications (Certified Coating and Piping inspector - CSWIP-BGAS Level 1, NACE Level 3, FROSIO Level 3, AMPP CIP Level 3 or equivalent and insulation – AMPP Level 2, I Corr level 3 or equivalent).
Required experience
- Minimum of 10 years’ experience in the Oil and Gas industry specifically large construction projects, with thorough knowledge of various safety regulations, standards, procedures
Skills
- Good knowledge of codes and standards related to the Instrumentation discipline.
- Recognized level of expertise in construction discipline with a good knowledge of TOTAL E&P general specifications/Contractors in oil and gas construction projects.
- The ideal candidate shall be fully conversant with applicable Oil and Gas Industry International Codes, Standards as well as best Industry Practices.
- A good awareness of other disciplines. Significant responsibility in multi-discipline teams or projects.
- Good interpersonal and organizational skills as well as a good level of computer literacy and proficiency in Microsoft Office. English mandatory
* Assist in compiling of company Quality Plan, Inspection, and test Plan (ITP), and Quality Procedures and all pertained QA/QC documentation before commencement of any fabrication/construction work. * Witness and monitor site coating activities, inspection, and testing following the approved Quality Plan, ITP, Quality Procedures, etc. * Review the approved procedure. * Record & and report all inspection requirements as per ITP. * Responsible for yard and field ongoing activities for coating inspection. * Ensuring the correct and valid calibration status of the inspection equipment. * Raise RFI’s to client inspection department through project management. * Witness & Inspection for Field Joint Coating. * Physical examination of the surface to be insulated is clean, dry, and free from other foreign matters. * Verify that no welding is to be carried out all welding work required has been finished already. * Verify no further painting touch up is required. * Physical examination for that material applied is the same as per the specification. * Check for uniformity of insulation surface, no gaps or voids, and check for thickness. * Verify the distance between the bands & and check moisture protection at the location where moisture could enter the insulation. * Check the joints of insulation segments are properly staggered and tight. * Verify that the insulation is dry and ready for weatherproofing. * Witness & and inspect all Blasting, Painting, and insulation activities for the Structures, Equipment, Piping, and tanks. * Inspect with a third party and vendor inspection for onward submission to the client. * Preparation of project documentation, Co-ordination for internal auditing
* Good knowledge of codes and standards related to the Instrumentation discipline. * Recognized level of expertise in construction discipline with a good knowledge of TOTAL E&P general specifications/Contractors in oil and gas construction projects. * The ideal candidate shall be fully conversant with applicable Oil and Gas Industry International Codes, Standards as well as best Industry Practices. * A good awareness of other disciplines. Significant responsibility in multi-discipline teams or projects. * Good interpersonal and organizational skills as well as a good level of computer literacy and proficiency in Microsoft Office. English mandatory
* Bachelor’s degrees in electrical/Instrument/Telecoms engineering or Trained qualifications (Certified Coating and Piping inspector - CSWIP-BGAS Level 1, NACE Level 3, FROSIO Level 3, AMPP CIP Level 3 or equivalent and insulation – AMPP Level 2, I Corr level 3 or equivalent).
JOB-6a10237bbdd20
Vacancy title:
QSSU-SINOPEC-CPI-Coating and Painting Inspector
[Type: FULL_TIME, Industry: Consulting, Category: Science & Engineering, Construction, Energy & Mining]
Jobs at:
Q-Sourcing
Deadline of this Job:
Saturday, July 25 2026
Duty Station:
Kampala | Kampala
Summary
Date Posted: Friday, May 22 2026, Base Salary: Not Disclosed
Similar Jobs in Uganda
Learn more about Q-Sourcing
Q-Sourcing jobs in Uganda
JOB DETAILS:
About This Job:
Q-Sourcing Limited trading as Q-Sourcing Servtec is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda, and South Sudan.
On behalf of our client SINOPEC, we are looking for a competent, skilled, and experienced Coating and painting Inspector to work at Site in Uganda
Key Responsibilities
The primary responsibilities of this position include:
- Assist in compiling of company Quality Plan, Inspection, and test Plan (ITP), and Quality Procedures and all pertained QA/QC documentation before commencement of any fabrication/construction work.
- Witness and monitor site coating activities, inspection, and testing following the approved Quality Plan, ITP, Quality Procedures, etc.
- Review the approved procedure.
- Record & and report all inspection requirements as per ITP.
- Responsible for yard and field ongoing activities for coating inspection.
- Ensuring the correct and valid calibration status of the inspection equipment.
- Raise RFI’s to client inspection department through project management.
- Witness & Inspection for Field Joint Coating.
- Physical examination of the surface to be insulated is clean, dry, and free from other foreign matters.
- Verify that no welding is to be carried out all welding work required has been finished already.
- Verify no further painting touch up is required.
- Physical examination for that material applied is the same as per the specification.
- Check for uniformity of insulation surface, no gaps or voids, and check for thickness.
- Verify the distance between the bands & and check moisture protection at the location where moisture could enter the insulation.
- Check the joints of insulation segments are properly staggered and tight.
- Verify that the insulation is dry and ready for weatherproofing.
- Witness & and inspect all Blasting, Painting, and insulation activities for the Structures, Equipment, Piping, and tanks.
- Inspect with a third party and vendor inspection for onward submission to the client.
- Preparation of project documentation, Co-ordination for internal auditing
Required Qualifications & Experience
Academic Qualifications
- Bachelor’s degrees in electrical/Instrument/Telecoms engineering or Trained qualifications (Certified Coating and Piping inspector - CSWIP-BGAS Level 1, NACE Level 3, FROSIO Level 3, AMPP CIP Level 3 or equivalent and insulation – AMPP Level 2, I Corr level 3 or equivalent).
Required experience
- Minimum of 10 years’ experience in the Oil and Gas industry specifically large construction projects, with thorough knowledge of various safety regulations, standards, procedures
Skills
- Good knowledge of codes and standards related to the Instrumentation discipline.
- Recognized level of expertise in construction discipline with a good knowledge of TOTAL E&P general specifications/Contractors in oil and gas construction projects.
- The ideal candidate shall be fully conversant with applicable Oil and Gas Industry International Codes, Standards as well as best Industry Practices.
- A good awareness of other disciplines. Significant responsibility in multi-discipline teams or projects.
- Good interpersonal and organizational skills as well as a good level of computer literacy and proficiency in Microsoft Office. English mandatory
Work Hours: 8
Experience in Months: 120
Level of Education: bachelor degree
Job application procedure
All candidates who meet the criteria outlined above are encouraged to apply under the job vacancy “QSSU-SINOPEC-CPI-COATING AND PAINTING INSPECTOR”
The deadline for applications is not later than 05:00 pm Saturday 25th, July 2026
Only shortlisted applicants will be contacted.
Application Link:Click Here to Apply Now
All Jobs | QUICK ALERT SUBSCRIPTION
